[Intuos 3] Mi tablet no reconoce el lápiz y el ratón

  • valeria
    22/11/2013 a las 8:25 am

    Hola,
    De aquí a un tiempo he tenido problemas con mi tablet pero hace cuatro días dejo de funcionar. Cuando conecto la tablet se enciende la luz, las teclas y el touch funciona pero no reconoce los dispositivos (ratón y lápiz).

    He probado a reiniciar, desinstalar el driver y volver a instalarlo (y no sólo la última versión de este sino de varias), también he probado a eliminar mis preferencias y las de los demás usuarios… e incluso llegué a desactivar las aplicaciones de windows para tablets porque decían que puede llegar a interferir en ocasiones con el funcionamiento.
    Ya en último remedio he restaurado el ordenador a origen de fábrica y NADA!

    Ya no sé que más hacer. Cada vez que entro en «Propiedades de la tableta» no aparece ni el ratón ni el lápiz en herramientas. No creo que sea la tablet porque funciona todo lo demás y se enciende al ser conectada.

    ¿Qué puedo hacer?
    Que las dos herramientas que no estén conectadas por cable dejaran de funcionar a la vez es extraño. ¿He podido desconfigurar la tablet o algo?
    Necesito acabar varios proyectos y trabajos, no tengo dinero y no puedo comprarme otra. Por favor, ayuda!

    Gracias

    rob
    22/11/2013 a las 9:47 am

    Hola Valeria entiendo tu frustración a mi me ha pasado algo parecido con la intuos 4, mas bien se me ha roto el lápiz no te preguntes como.

    Te enlazo un link por si te sirve, que yo voy a utilizar. que al final es parecido.

    http://tabletaswacom.com/tienes-preguntas/pregunta/instalar-grip-pen

    A ver si tu ayuda, ya te contare. Dios el mundo del diseñador. Yo no soy nadie sin mi lápiz. jejej

    😉

    Liliana
    22/11/2013 a las 6:56 pm

    Hola! Queria saber que pluma(modelo, referencia, caracteristicas) compro para mi wacom intuos 5, no alcanzo a verla muy bien pues mi perrita la mordio toda…gracias…saludos!

    valeria
    22/11/2013 a las 11:11 pm

    Rob,
    Muchas gracias por el enlace. Si soy sincera ya había probado eso pero lo volví a repetir cumpliendo a rajatabla los momentos en los que tenía que conectar y desconectar la tablet… pero nada.
    Mi problema sigue igual, sigue sin reconocer los dispositivos del lápiz y ratón.
    Si alguien tiene alguna solución ruego para que me la desvele o tendré que parar todos los trabajos que había empezado.

    Esto es muy frustrante…

    rob
    28/11/2013 a las 3:59 pm

    Hola valeria,

    Yo he conseguido solucionar el problema, lo he conseguido bajandome el controlador de está página

    http://www.wacom.eu/index4.asp?pid=29&lang=es&send=1&product=CTT

    Por que hay otra que resulta que ofrece un driver antiguo

    Espero que te ayude

    Un abrazo

    valeria
    08/12/2013 a las 8:56 pm

    Nada de nada.
    Ya lo había intentado pero decidí probar igualmente pero nada. Además, parece ser que no puedo abrir «Configuración de Display Wacom». Cuando lo hago me dice que no hay un ningún monitor interactivo…

    valeria
    20/03/2014 a las 2:48 am

    Bueno, al final no sé que le pasa ami tablet, reuní para comprar otra. Aun tengo la esperanza de arreglar la otra pero tiro con otra. Gracias a todos los que me ayudaron.

    – Valeria

    Mohamed
    10/09/2014 a las 4:01 pm

    Haha, I’ve been putting a sheet of paper on my teablt for years too. It does feel a lot better and I feel I make better drawings with it. I’ve also recommended some friends to try it out, but they don’t like the texture and prefer the slippery plastic/glass feel. Whatever rocks their boat, I guess I use a medium size Intuos4 and cut my paper to match the size of the sensor . I find it confusing to just lay a whole sheet over the Wacom. I’ve also removed the rubber grip on my pen, as I found it too bulky. Without the grips the pen feels alot thinner, like a real pencil, and I find I have better control over my strokes that way. I don’t use the side buttons, so I removed them too.Another reason why I remove the grips is cause in time it becomes sticky, which I find uncomfortable.Another thing I use to prevent the sweating and dirtying of the paper is that I wear a very thin glove (sort of like comic book artists use) and cut the middle, pointing and thumb sleeves at the first knuckle, leaving only the ring and pinky fingers covered. But I’ve seen Wacom sell proper gloves for use especially with the Cintiq.

    Dario
    10/09/2014 a las 7:33 pm

    Thanks for this, will definitely try and find some at home depot! and as far as safurce adjustments .Definitely use WAX PAPER works great! Or any kind of water/liquid resistant paper, totally solves the hand grime problem. Art supply stores have all kinds of whacky papers you can experiment with.Also to keep the paper on the tablet try making sure it is stretched firm to stop paper bulging. DON’T use printer paper it is too thin.I hunted down two very wide rubber bands and put them on the sides of my tablet so i don’t have to keep using tape. Regular paper will bulge no matter what after some time and will get in the way of fine pen motions. Wax paper however never did and I love it. If you like smoother feels try overhead projector paper.

    Marcos
    10/09/2014 a las 8:27 pm

    The slipperiness used to bug me not so much bueacse of the feel of the pen, but bueacse like skin on plastic my hand would stick to the tablet surface. Target dollar bin, 2 of those little gloves you wore as kids, cut the fingers off accept for the pinky, used a lighter to melt the ands of the finger holes so they wont continue to fray. BAM 2 tablet glovesNow I can lay down good pressure on the butt of my hand and it really steadies out my arm for big lines. I tattoo for a living and using that part of the hand to stretch is kind of essential so maybe this feels more natural to me than other artists.

    Eren
    10/09/2014 a las 11:10 pm

    I also had the idea of placing a piece of paper over my wacom tbalet to reproduce the feeling but then it also reproduced the physic fact, like a normal pencil would, of wearing out because of the friction, what produced a shaped stylus tip although they can be replaced, i ended up using the plastic skin under the protective sheet, it still have the glassy feeling but it’s less destructive working for me so far.

    Munay
    11/09/2014 a las 12:52 pm

    yay!!! paul, i LOVE it!! first, the flipbook atoianimn, now the ds, you’re my hero! and now i want this game too. these sketches are great and behind the struggle of the 2 inches screen there seem to be quite some fun ;)the italy trip is getting close, we’re very busy with work but I really hope we’ll manage to meet up. In the meantime stay well my friend! Can’t wait to see the italian sketches.Ale

    Reina
    11/09/2014 a las 1:05 pm

    TY!! someone with a mind filnaly spoke up. i thought that there was no real improvments in photoshop. If there was a new tool or tons of new effects then yeah i can see paying for it in the exchange but not the money they want.

    Gusnelita
    11/09/2014 a las 1:07 pm

    Hi Paul,Is there any chance you could do any more pthsohoop brush tutorials please? I would especially be interested to see how you painted the fur texture on the Open Season characters lower down on your blog.Cheers!

    Emha
    11/09/2014 a las 7:28 pm

    Thanks, Jon. Your experience mirrros mine exactly. I grabbed demos of Sketchbook Pro and Manga Studio the same day and was drawing in SBP in minutes whereas Manga Studio took a couple days of messing with to get the flow.I’m so glad my overview helped you become familiar with the software a little better!

Agrega tu respuesta
Tu información: